Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 5 matches

by wgilbert
May 3rd, 2013, 12:07 pm
Forum: Other Source Measurement Units (SMU)
Topic: Improved SMU Device Errors vi
Replies: 1
Views: 12031

Improved SMU Device Errors vi

While I'm at it, I also found a non-optimum feature of the SMU Device Errors query vi. It will overwrite any upstream error messages in the LV error cluster. For instance, if you call it twice along the communication chain connected by the error cluster, if it finds an illegal instruction error in t...
by wgilbert
May 3rd, 2013, 11:53 am
Forum: Other Source Measurement Units (SMU)
Topic: Mistake in Labview 237 Basic Config driver vi
Replies: 1
Views: 11353

Mistake in Labview 237 Basic Config driver vi

Hi, Just found a mistake in the Keith 237 Basic Config Labview driver vi. The enumerated type control for integration time has the text for 60 hz line cycle, and 50 hz backwards. This is hard to spot, since the instrument only displays "LINE CYCLE INTEGRATION" on the front panel once this has been p...
by wgilbert
February 23rd, 2011, 10:51 am
Forum: 2400 Series SourceMeter
Topic: Remote programming of Output enable lines?
Replies: 3
Views: 15681

Re: Remote programming of Output enable lines?

I guess this should have been obvious, but maybe it was just late on a Friday afternoon when I looked for this. I've attached my vi(LV2009) for anyone who cares to use it, seems to work fine.
by wgilbert
February 23rd, 2011, 10:12 am
Forum: 2400 Series SourceMeter
Topic: Remote programming of Output enable lines?
Replies: 3
Views: 15681

Re: Remote programming of Output enable lines?

Just got round to checking on the thread. Thanks, Dale! I'll dig through and modify one of the drivers if necessary, can post back to you if you like.
by wgilbert
February 18th, 2011, 3:41 pm
Forum: 2400 Series SourceMeter
Topic: Remote programming of Output enable lines?
Replies: 3
Views: 15681

Remote programming of Output enable lines?

Hi, I am just about to ship my system incorporating a 2410 sourcemeter. The last thing I did was wire up pins 8 and 9 of the DIO connector to a set of dry relay contacts to create a safety interlock when the fixture enclosures are opened. It works fine when programmed and operated from the front pan...

Go to advanced search