Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 8 matches

by Christian R
August 19th, 2011, 12:08 am
Forum: Keithley DAQ Data Aquisition Products
Topic: Installing KPCI-3140 board
Replies: 3
Views: 14097

Re: Installing KPCI-3140 board

I'm sorry, the fastet AD-Board Keithley can offer is the KPCI-3110A. The KPCI-3110A has a max. single channel reading of 1.25 Mhz.
by Christian R
May 5th, 2011, 7:05 am
Forum: Series 2700 Multimeter/Data Aquisition/Switch System
Topic: Measure DC Voltage mit 180 Hz sawtooth
Replies: 1
Views: 8719

Re: Measure DC Voltage mit 180 Hz sawtooth

If an AC + DC signal connected to the 2700, the 2700 measure in DC mode only the DC part and in AC mode only the AC part. But on DCV you will maybe see a little offset, which comes from the AC signal. To eliminate this you can put in a RC Filter (10KOhm, 1 µF will be a good choise for 180Hz). An ave...
by Christian R
February 14th, 2011, 7:50 am
Forum: Keithley DAQ Data Aquisition Products
Topic: KUSB 3108 vs Testpoint V6 DLL error
Replies: 5
Views: 18528

Re: KUSB 3108 vs Testpoint V6 DLL error

The TPDLINX.dll is only for DriverLinx Boards like KPCI-310x, so the DLDIO Object will not worked. KUSB-3108 uses DT Open Layer from Datatranslation. So you have to install with Testpoint the Datatranslation Driver. If you like to use DIO's or CT you need the CEC-DIO and/or CEC-CT Objects. These Obj...
by Christian R
February 1st, 2011, 5:29 am
Forum: LabView Drivers
Topic: [KE2700] IVI Class-Driver (DMM) and Labview
Replies: 1
Views: 9225

Re: [KE2700] IVI Class-Driver (DMM) and Labview

Hello, the IVI DMM Driver for the 2700 is only an DMM Driver, that does not include any switching capabilty, that the 2700 has. If you would like to have also the switching included, you must use the Labview driver. Keithley Series 2700 Native LabView Driver Version 2.3.0 http://www.keithley.de/supp...
by Christian R
December 21st, 2010, 12:09 am
Forum: Series 3700 Switch System/Multimeter and Plug-In Cards
Topic: LAN connection fails in long measurements
Replies: 14
Views: 41928

Re: LAN connection fails in long measurements

Dear Juuso,

I took a look in your code. Please add a waitcomplete() command after the scan.background() command to your code.

Best regards
Christian
by Christian R
December 18th, 2010, 1:39 pm
Forum: Series 3700 Switch System/Multimeter and Plug-In Cards
Topic: LAN connection fails in long measurements
Replies: 14
Views: 41928

Re: LAN connection fails in long measurements

If you want to have a stabel USB, GBIB or LAN connection !!!!! It is very Important to have the latest Firmware and Operating System (OS) installed. The firmware update to 1.40K is a little bit complex !!!! 1. Do a "normal" Firmware update. 2- Do it a second time: By pressing the bottom Menu - Upgra...
by Christian R
December 17th, 2010, 5:56 am
Forum: Series 2700 Multimeter/Data Aquisition/Switch System
Topic: How to use the KE2700_InstallPseudoCard function
Replies: 2
Views: 11221

Re: How to use the KE2700_InstallPseudoCard function

Do you have tried to use the function KE2700_InstallPseudoCard with real Hardware ?
The code itself looks good, but does it makes sense to install a simulated (pseudo) card in a simulated device ?

Regards
Christian
by Christian R
December 9th, 2010, 7:25 am
Forum: ExcelLINX
Topic: protection of spread sheet
Replies: 1
Views: 8988

Re: protection of spread sheet

The spread sheet isn`t protected from Excellinx.
The only think that is protect are the "yellow" fields in the config and the scan sheet, and this cannot be unprotected.

Go to advanced search