Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 20 matches

by Theerapong
February 12th, 2019, 2:52 am
Forum: KickStart
Topic: KICKSTARTFL-HRMA Manual
Replies: 1
Views: 1826

KICKSTARTFL-HRMA Manual

I am looking for KICKSTARTFL-HRMA manual on Tek website.
Unfortunately, I couldn't find it.

Anyone can help?
by Theerapong
February 11th, 2019, 9:55 pm
Forum: KickStart
Topic: Kick start 2 licence period
Replies: 5
Views: 3156

Re: Kick start 2 licence period

Thank you for your information.

I purchases both software from Trinergy in Thailand, but i got only 4 years licences.

Do you know why?
by Theerapong
February 11th, 2019, 6:42 am
Forum: KickStart
Topic: Kick start 2 licence period
Replies: 5
Views: 3156

Re: Kick start 2 licence period

Yes, I know that.

So, how long can i use those after i purchase both licences?
by Theerapong
February 4th, 2019, 4:37 am
Forum: KickStart
Topic: Kick start 2 licence period
Replies: 5
Views: 3156

Kick start 2 licence period

How long can I use the licence Kick start software for KICKSTARTFL-HRMA and also KICKSTARTFL-BASE?

Are they the lifetime licence.
by Theerapong
October 5th, 2018, 2:46 am
Forum: LabView Drivers
Topic: When will 2450 smu labview driver available?
Replies: 3
Views: 5305

Re: When will 2450 smu labview driver available?

Thank you for your help.

I try to install it by following this guide.
https://www.youtube.com/watch?v=DKCpkPIT9Xg

But, I cannot install this driver with Labview NXG.
How can I do that?
by Theerapong
September 21st, 2018, 10:27 pm
Forum: LabView Drivers
Topic: When will 2450 smu labview driver available?
Replies: 3
Views: 5305

When will 2450 smu labview driver available?

I am looking for 2450 smu labview driver, but only old version of 24xx smu on the list.
So, when will it available for user.
by Theerapong
September 5th, 2018, 1:10 am
Forum: KickStart
Topic: Is it possible to do data logging from 2450 SMU?
Replies: 0
Views: 2330

Is it possible to do data logging from 2450 SMU?

I would like to logging resistance-time or current time from my test samples.
Could you please suggest?
by Theerapong
August 14th, 2018, 11:38 am
Forum: 2450/2460 Touchscreen SourceMeter
Topic: 2450 Current reading is incorrect.
Replies: 3
Views: 4696

Re: 2450 Current reading is incorrect.

I have upgraded the firmware for 2450 SMU, form 1.5.0g to 1.6.4c.
After that, I took a measurement again and the result is still incorrect, current.
by Theerapong
August 14th, 2018, 3:53 am
Forum: 2450/2460 Touchscreen SourceMeter
Topic: 2450 Current reading is incorrect.
Replies: 3
Views: 4696

Re: 2450 Current reading is incorrect.

I looked back to the SMU screen. It was over flow indication on that.
But, form NI I/O trace, I couldn't found any error.
by Theerapong
August 11th, 2018, 12:40 am
Forum: 2450/2460 Touchscreen SourceMeter
Topic: 2450 Current reading is incorrect.
Replies: 3
Views: 4696

2450 Current reading is incorrect.

Now, I am learning how to program Keithley 2450 SMU from the 2450 example labview driver. https://www.tek.com/source-measure-units/2450-software-10 I run the Keithley 2450 Read Multiple file and find out that it showed incorrect current reading as indicated in the images. R data was shown after V an...
by Theerapong
October 2nd, 2017, 5:36 am
Forum: Solar Cell Measurements
Topic: TSP problem with example script in 2450 manual
Replies: 1
Views: 7978

TSP problem with example script in 2450 manual

I do run TSP script following the example in the USER manual for solar cell, I-V test (p. 9-7 and 9-8). I used the rear panel with 2-wires tri-axial cables connected with FORCE HI and FORCE LO. The KE2450 error was shown -286 code (attemp to perform arithmetic on field '?' / nil value) Also 4914 (in...
by Theerapong
May 28th, 2017, 9:15 am
Forum: Low Current Measurements
Topic: Reading data problem from 2450 with Labview.
Replies: 0
Views: 8045

Reading data problem from 2450 with Labview.

I use labview with 2450 smu instrument driver creadted my measurement VI for I and R measurement. I found that VI reads and send only the first data that it get repeating other than reading the new data from smu. I know that because I use VR and adjusting the R value and I enable highlight execution...
by Theerapong
May 17th, 2017, 1:30 pm
Forum: 2450/2460 Touchscreen SourceMeter
Topic: 2450 Error while using with labview
Replies: 0
Views: 6623

2450 Error while using with labview

I found the useful VI for real time resistance measurement using 6517B as the link below. https://forum.tek.com/viewtopic.php?f=82&t=51540 I would like to edit the VI file for using with my 2450 SMU. 1. Even though the PC can record data correctly, the 2450 SUM always show the error code -113 on scr...
by Theerapong
May 16th, 2017, 10:51 am
Forum: 2450/2460 Touchscreen SourceMeter
Topic: How can I use 2450 for realtime Resistance measurement (R_T Curve)?
Replies: 4
Views: 15268

Re: How can I use 2450 for realtime Resistance measurement (R_T Curve)?

I have to check the R_T signal for a long peroid of time, let say 2-3 day.
So, how long or how many data point that i can store in the 2450 smu memory?

Can I store the data directly to USB during measured the resistance or other signal?
by Theerapong
May 13th, 2017, 10:46 am
Forum: 2450/2460 Touchscreen SourceMeter
Topic: How can I use 2450 for realtime Resistance measurement (R_T Curve)?
Replies: 4
Views: 15268

How can I use 2450 for realtime Resistance measurement (R_T Curve)?

I wolud like to use 2450 for realtime Resistance measurement (R_T Curve).
But, I am new user for Labview.

Please help.
by Theerapong
May 30th, 2014, 11:42 am
Forum: Electrometers
Topic: Which GPIB Product that working well with 6517A Electrometer
Replies: 4
Views: 15266

Re: Which GPIB Product that working well with 6517A Electrom

Thank you for your help.
I also have found the NI GPIB-USB-HS GPIB Controller for Hi-Speed USB.

http://sine.ni.com/nips/cds/view/p/lang ... #resources

Which one is you recommended, NI or Keithley, and which one is cheaper?
by Theerapong
May 30th, 2014, 11:00 am
Forum: Electrometers
Topic: Which GPIB Product that working well with 6517A Electrometer
Replies: 4
Views: 15266

Re: Which GPIB Product that working well with 6517A Electrom

From the URL that I post, I didn't see 6517A on the list.
So, I think that it doesn't support my equipment.
Do I misunderstand?

Now, I have no any of GPIB card or USB to use.
by Theerapong
May 30th, 2014, 10:50 am
Forum: Resistivity Measurements
Topic: resistance measurments using 6517A
Replies: 7
Views: 25311

Re: resistance measurments using 6517A

Hi all, I am a new user for Labview, and I also would like to measure the same.
Could you please give me more detail for the example program that you share.

Thank,
by Theerapong
May 30th, 2014, 10:26 am
Forum: Electrometers
Topic: Which GPIB Product that working well with 6517A Electrometer
Replies: 4
Views: 15266

Which GPIB Product that working well with 6517A Electrometer

Hi, all. I do work with 6517A Electrometer. I would like to record the Resistance signal on my laptop throughout the GPIB interface. May I know that which one is working well with my equipment? I found that the model KUSB-488B IEEE-488.2 USB-to-GPIB interface adapter didn't supported my 6517A electr...

Go to advanced search