Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 8 matches

by CuriousGeorge
December 15th, 2018, 6:01 am
Forum: General Discussion
Topic: 2022C Trigger Delay
Replies: 1
Views: 2360

Re: 2022C Trigger Delay

Not sure I follow the nature of complaint. You are triggering off a signal connected to the Ext Trig. Rising Edge @ 8mV. Your captured waveform shows you the trigger point with the white down arrow at top of screen. Happens within first 10msec of the capture. To sort it out, can you tee a scope chan...
by CuriousGeorge
September 20th, 2017, 1:13 pm
Forum: 4200-SCS Semiconductor Parameter Analyzer
Topic: calculate doping density
Replies: 1
Views: 6803

calculate doping density

Can the 4200 help me compute doping density?
by CuriousGeorge
May 9th, 2016, 7:43 am
Forum: DMM7510 Graphical Sampling DMM
Topic: TSP or SCPI
Replies: 1
Views: 9368

TSP or SCPI

If I want to use Kickstart software, which command set should the instrument be set to?

What about the IVI Driver? Which command set for that?
by CuriousGeorge
February 3rd, 2015, 7:49 am
Forum: Older & Obsolete Instruments
Topic: Keithley 614
Replies: 4
Views: 16583

Re: Keithley 614

Here is link to a blog on how they solved a similar connection issue when trying to use an older electrometer with the two lug triax:
http://carconline.blogspot.com/2010/04/ ... ction.html
by CuriousGeorge
October 19th, 2014, 4:21 pm
Forum: Other Source Measurement Units (SMU)
Topic: Connecting probe station to 6430 SMU
Replies: 3
Views: 14373

Re: Connecting probe station to 6430 SMU

Can the LO on the back of the 6430 be used?
In this way, could use the triax from the HI to one probe and adapt the other probe triax cable to BNC then banana and connect to the LO on back of the 6430.
Is this possible valid connection for 2-wire connection?
by CuriousGeorge
June 12th, 2012, 5:40 am
Forum: Keithley DAQ Data Aquisition Products
Topic: KPCI-3140 board
Replies: 1
Views: 9978

Re: KPCI-3140 board

Data Translation has some similar boards.
Try here:
http://www.datatranslation.com/products ... pci/DT340/
by CuriousGeorge
January 22nd, 2012, 6:32 pm
Forum: Keithley DAQ Data Aquisition Products
Topic: Serial required for DriverLINX install
Replies: 1
Views: 8934

Re: Serial required for DriverLINX install

For the installation of the DriverLINX software, use the following serial number: 40031237.

Be sure also to check the Keithley support section of web site for any driver updates.

Go to advanced search