Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 12 matches

by stampy
December 28th, 2012, 2:59 pm
Forum: Programming Support
Topic: WFM6120 SDI Analyser
Replies: 1
Views: 10560

Re: WFM6120 SDI Analyser

The WFM6120 has a web interface available via network connection.
There is also the capability of sending SNMP traps of which are described further in the programmers manual found at http://www.tek.com/waveform-monitors/wf ... wvr-series.
by stampy
December 18th, 2012, 10:05 am
Forum: Programming Support
Topic: MTS400 Tektronix Multiplexer Ei096 doesn't allow to edit..
Replies: 1
Views: 10820

Re: MTS400 Tektronix Multiplexer Ei096 doesn't allow to edit..

Can you please provide additional information on how it gets to the point of displaying this error message? We would like to know what button sequence you are using to make this occur. As well which standard are you using and any additional information on your source would be useful.

Dan
by stampy
November 28th, 2012, 5:00 pm
Forum: Programming Support
Topic: WFM8300 - audio clock phase data analysis
Replies: 2
Views: 13784

Re: WFM8300 - audio clock phase data analysis

Michael, There is some information that is found in the help files of the WFM8300. I believe what you would like to look at is the Group Sample Phase. Embed Group Sample Phase. Warns of sample phase errors between the selected embedded audio groups. More specifically, either: The initially determine...
by stampy
August 20th, 2012, 4:45 pm
Forum: Programming Support
Topic: MTS400 Tektronix Multiplexer Ei096 doesn't show UNT
Replies: 2
Views: 13433

Re: MTS400 Tektronix Multiplexer Ei096 doesn't show UNT

Christophe,

If you add the table and close the stream it has not had the opportunity to recompile and the changes you made would not appear correct. After you add the table you will need to "Start" for the multiplexer to recompile and it should show it correctly after this.

Dan
by stampy
July 12th, 2012, 2:16 pm
Forum: Programming Support
Topic: WFM8200 capture format
Replies: 4
Views: 20727

Re: WFM8200 capture format

The file format for .cap files is proprietary and I am unable to provide this requested information.

Dan
by stampy
November 2nd, 2011, 10:52 am
Forum: Programming Support
Topic: WVR 7100 preset loading via java interface not working
Replies: 1
Views: 11935

Re: WVR 7100 preset loading via java interface not working

Marcus, In order to save or load presets on the WVR7100, you have to use the web applet tool that is downloaded at http://www2.tek.com/cmswpt/swdetails.lotr?ct=SW&cs=sap&ci=4971&lc=EN. The ability to save / load presets is the only difference between this applet and the one found on the Remote Inter...
by stampy
August 2nd, 2011, 1:08 pm
Forum: Programming Support
Topic: 1720 & 1730 monitors
Replies: 1
Views: 11766

Re: 1720 & 1730 monitors

Hal, The only thing available through Tektronix are the manuals -. For the 1720 is the combined user / service manual: http://www2.tek.com/cmswpt/madetails.lotr?ct=MA&cs=mus&ci=10969&lc=EN. For the 1730 is the combined user / service manual: http://www2.tek.com/cmswpt/madetails.lotr?ct=MA&cs=mus&ci=...
by stampy
August 2nd, 2011, 1:04 pm
Forum: Programming Support
Topic: WVR 7000 series NTP Sync connection
Replies: 2
Views: 14542

Re: WVR 7000 series NTP Sync connection

Z,

There is no NTP clock available for our waveform monitor / rasterizers. It uses either VITC or LTC.

Regards,
Dan
by stampy
August 2nd, 2011, 12:57 pm
Forum: Programming Support
Topic: WFM 7120 now get a white screen under sw v6.07
Replies: 1
Views: 11432

Re: WFM 7120 now get a white screen under sw v6.07

Terry, There is a v6.1.0 available on the web at this time. I am not sure if it will address this issue, but please give it a try. It might be an issue with the unit sync up to your signal when switching back and forth it is re-locking up to your source and it is just having a difficulties with a no...
by stampy
June 13th, 2011, 4:52 pm
Forum: Programming Support
Topic: WFM7100 firmware update
Replies: 1
Views: 11586

Re: WFM7100 firmware update

From the description of the issue, it sounds as if you may have upgraded units with the touch display to the newer non-touch screen firmware. The description of the update states this will work with the WFM7100 with Option FP. The option FP is the updated front panel which removed the touch screen a...
by stampy
December 9th, 2010, 9:28 am
Forum: Programming Support
Topic: bug with cerify upgrade in 7.0.1.24
Replies: 1
Views: 11767

Re: bug with cerify upgrade in 7.0.1.24

The system requirements states 50GB of available hard drive space. Please confirm that you have 31.5GB of free space. I do have a request to the product engineers regarding the issue. As well I see that you have a request to one of your local sales contacts. The forum is used for community support a...
by stampy
September 10th, 2010, 4:57 pm
Forum: Programming Support
Topic: WVR 5000 change output resolution
Replies: 1
Views: 12033

Re: WVR 5000 change output resolution

Hi Silvan, The DVI output is a DVI-I output which has both analog (XGA) and digital (DVI) output. The XGA output is a fixed resolution and is not capable of being adjusted. The DVI out is designed to auto adjust to the best resolution. The unit is not capable of having a different format. The displa...

Go to advanced search