Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 3 matches

by Grant B
March 6th, 2014, 11:19 am
Forum: Older and Obsolete Signal Sources
Topic: AWG70K MATLAB ICT Send Waveform Example
Replies: 1
Views: 10609

AWG70K MATLAB ICT Send Waveform Example

%% Waveform Sample Data Calculation - Pure Matlab freq = 10; per = 1/freq; cycles = 100; SR = 100; t = 0:1/SR:cycles*per-1/SR; w = freq*2*pi; a = sin(1/freq*pi*t); y = single(a.*sin(w*t)); waveform_data = y; %plot(t,y); %% Opening VISA Session visa_vendor = 'ni'; visa_address = 'TCPIP::134.62.36.57...
by Grant B
September 30th, 2013, 10:35 am
Forum: Older and Obsolete Signal Sources
Topic: AFG3021C connection issue
Replies: 2
Views: 13032

Re: AFG3021C connection issue

As far as I know, ArbExpress v2.8 has severe bugs affecting most core functionality of the software. If I recall correctly it was completely removed from www.tek.com for this reason. It looks like v2.9 is the latest version available for download. I would try updating to the latest version to see if...
by Grant B
September 19th, 2012, 11:57 am
Forum: Programming Support
Topic: 1kHz bins on an RSA3303A Spectrum Analyzer
Replies: 1
Views: 9286

Re: 1kHz bins on an RSA3303A Spectrum Analyzer

When using the standard/Factory Default Spectrum Analyzer mode and selecting the FFT setting, you may select powers of 2 as your number of FFT points used. This selection corresponds to the number of sample values saved in a .trc spectrum trace file. 1024 FFT points yields 800 saved sample values, 2...

Go to advanced search