Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 5 matches

by S.tanguy
March 1st, 2017, 8:49 am
Forum: Series 3700 Switch System/Multimeter and Plug-In Cards
Topic: 3706a 1.54a script stops at 172325 buffered values
Replies: 0
Views: 6699

3706a 1.54a script stops at 172325 buffered values

Hello , I'm running a script which measures 5 channels (card 3721 mode DCV NPLC 0.005) and fills the Buffer (Size:500000, timestamp enabled). Measurements are triggered by a defined delay depending on the stimulus EVENT_SCAN_READY and are running in background. At the beginning, all goes well but, ...
by S.tanguy
August 10th, 2016, 5:03 am
Forum: Series 3700 Switch System/Multimeter and Plug-In Cards
Topic: Keithley 3706a: unable to disable web interface
Replies: 0
Views: 7149

Keithley 3706a: unable to disable web interface

Hello In the main presentation of this DMM, it's written that the buffer has 650.000 timestamped points available with web disabled. So I tried to disable web function with comm.lan.web.enable command and front panel configuration but no one really disables the onboard web server The memory is still...
by S.tanguy
August 10th, 2016, 1:38 am
Forum: Other DMM's
Topic: K3706a FW 1.54 freezes with buffering function
Replies: 4
Views: 19371

Re: K3706a FW 1.54 freezes with buffering function

We found the culprit: the socket wasn't maintained open, so the software used to reopen a socket for each period of measurement.
After a while, the instrument is no more able to accept connections.
by S.tanguy
June 1st, 2016, 5:28 am
Forum: Other DMM's
Topic: K3706a FW 1.54 freezes with buffering function
Replies: 4
Views: 19371

Re: K3706a FW 1.54 freezes with buffering function

Thank you for your help Brian!
However, I only scan 5 PT100 at this time, 10 seconds should be enough to finalize the job!
Is there a way for the script to programatically wait the end of the running scan before to start an other one?
by S.tanguy
May 25th, 2016, 6:15 am
Forum: Other DMM's
Topic: K3706a FW 1.54 freezes with buffering function
Replies: 4
Views: 19371

K3706a FW 1.54 freezes with buffering function

Configuration: Labview communicating on 8 parallel 3706a with buffering function and autonomous background scanning Eight * Keithley 3706a with 5 *3720 multiplexer and 3720-ST boards synchronized with Meinberg GPS PTP source mdns disabled Expected function: LV creates a script which performs a backg...

Go to advanced search