Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 20 matches

by zvikae
October 2nd, 2018, 12:33 pm
Forum: 4200-SCS Semiconductor Parameter Analyzer
Topic: error -992
Replies: 1
Views: 2573

error -992

I am getting error -992 when running KXCI and sending *IDN? to 4200A.
error exist when using ACS BASIC or KUSB488B diagnostic.
tried all terminations.
by zvikae
September 15th, 2018, 10:01 am
Forum: 4200-SCS Semiconductor Parameter Analyzer
Topic: 4200A remote controlled
Replies: 9
Views: 8797

Re: 4200A remote controlled

No, I meant to control the 2410 from the 4200A under Clarius, is there a library to do this?
by zvikae
September 12th, 2018, 10:08 am
Forum: 4200-SCS Semiconductor Parameter Analyzer
Topic: 4200A remote controlled
Replies: 9
Views: 8797

Re: 4200A remote controlled

I offered a customer to replace an old Keithley 237 and an old Agilent LCR with the 4200A 2 SMU's a CVU and CVIV. the customer is checking a diode on a wafer he makes in his FAB they have to do an IV test and CV and calculate Flat Band Voltage. I found a project in Clarius that does it, we got very ...
by zvikae
September 11th, 2018, 1:43 pm
Forum: 4200-SCS Semiconductor Parameter Analyzer
Topic: 4200A remote controlled
Replies: 9
Views: 8797

Re: 4200A remote controlled

when you say "It is not currently possible to run a Clarius project remotely via commands" does it mean it will be in the future ? if yes, when ?
by zvikae
September 6th, 2018, 5:13 am
Forum: 4200-SCS Semiconductor Parameter Analyzer
Topic: 4200A remote controlled
Replies: 9
Views: 8797

4200A remote controlled

I Know it is possible to control the 4200A via KXCI, but this means to wright some code. Is it possible to run a Clarius project or test from a remote computer and get the data including calculated data by Formulator ? If not, does Keithley have some way of transferring Clarius tests/projects to KXC...
by zvikae
September 5th, 2018, 5:57 am
Forum: 4200-SCS Semiconductor Parameter Analyzer
Topic: 4200A and 2410
Replies: 1
Views: 2840

4200A and 2410

I want to use the 4200A with 2 SMU's and 2410 to test high voltage FET's.
will Clariuse support it?
what kind of protection is needed?
has it been done?
please advise.

or 2612 and 2410 controlled by ACS basic?
by zvikae
August 2nd, 2018, 7:30 am
Forum: DMM6500 Bench/System DMM
Topic: KickStart
Replies: 1
Views: 3367

KickStart

Hi.
I have 2 questions regarding KickStart.
1. After scan how can I save the measured data with channels name/number ?
2. If customer buys the DAQ6510 is the license for KickStart a permanent one ?
by zvikae
June 21st, 2018, 11:43 pm
Forum: KickStart
Topic: New KickStart & 3706 + 3723 single pol
Replies: 1
Views: 3867

New KickStart & 3706 + 3723 single pol

hi
will the new KickStart support the 3723 multiplexer in the 3706 in single pol mode ?
by zvikae
June 21st, 2018, 11:26 pm
Forum: DMM6500 Bench/System DMM
Topic: Voltage difference between terminales
Replies: 1
Views: 3851

Voltage difference between terminales

Hi.
when measuring resistance, is there a limit for max voltage difference between input High and sense High? and input Low and sense Low? (like the limit in SMU's).
by zvikae
June 11th, 2018, 8:50 am
Forum: Series 2000 and Series 2100 DMM's
Topic: LabView driver for K2000
Replies: 1
Views: 3923

LabView driver for K2000

can not down load the LabView driver for K2000 DMM.
please provide an operating link.
by zvikae
February 22nd, 2018, 11:59 pm
Forum: DMM7510 Graphical Sampling DMM
Topic: usb stick not recognized
Replies: 7
Views: 11131

Re: usb stick not recognized

It is FAT32
by zvikae
February 15th, 2018, 7:18 am
Forum: DMM7510 Graphical Sampling DMM
Topic: usb stick not recognized
Replies: 7
Views: 11131

usb stick not recognized

hi.
from time to time the 7510 does not recognize the USB stick even though it is in place. it happens with several sticks. firmware version 1.5.3d.
please advise.
by zvikae
October 22nd, 2017, 4:05 am
Forum: 2600 Series SourceMeter
Topic: keithley configuration panel & Windows 10
Replies: 3
Views: 9597

keithley configuration panel & Windows 10

hi
keithley configuration panel does not start correctly
any advice for troubleshooting?
by zvikae
May 22nd, 2017, 12:55 am
Forum: DMM7510 Graphical Sampling DMM
Topic: 7510 and KickStart - Sample Count
Replies: 1
Views: 8512

7510 and KickStart - Sample Count

When using the 7510 and KickStart sample count is limited to 100000, I need to measure at 1000000 sample per second for 5 seconds. can it be done? how?
by zvikae
February 12th, 2017, 10:18 pm
Forum: Series 2000 and Series 2100 DMM's
Topic: Model 2002 / KUSB-488B Driver Issue
Replies: 7
Views: 22778

Re: Model 2002 / KUSB-488B Driver Issue

hi stuart.
could not find the private message, please resend
by zvikae
February 1st, 2017, 4:28 am
Forum: 2450/2460 Touchscreen SourceMeter
Topic: Bugs detected in 2450
Replies: 5
Views: 18679

Re: Bugs detected in 2450

Hi brian.
I have the same problem case #3, 2450 freezes after changing GRAPH settings.
please advise.
by zvikae
February 1st, 2017, 2:08 am
Forum: 2450/2460 Touchscreen SourceMeter
Topic: 2450 Keithley configuration panel USB connection
Replies: 0
Views: 6538

2450 Keithley configuration panel USB connection

configuring a USB connection to the 2450 runs OK.
trying to use the connection with the Keithley communicator gives the error massage: " Unknown attribute name for initial setting in configuration file"
please advise correction.
by zvikae
October 5th, 2016, 12:17 am
Forum: Series 3700 Switch System/Multimeter and Plug-In Cards
Topic: 3723 Channel Pattren
Replies: 1
Views: 9437

3723 Channel Pattren

Hello
In card 3723, is it possible to control "SINGLE POLE/DOUBLE POLE" relay with "channel.patren.setimage" command ?
by zvikae
July 22nd, 2016, 2:05 pm
Forum: Series 2280 Precision Measurement DC Power Supplies
Topic: 2281S battery
Replies: 1
Views: 9360

2281S battery

using discharge mode (1 Amp) it is possible to measure 2500 samples (buffer size) time between measurements is 480ms how is it possible to increase the time so that a primary battery can be fully discharged?
by zvikae
July 12th, 2016, 1:02 am
Forum: DMM7510 Graphical Sampling DMM
Topic: 7510 digitizer
Replies: 1
Views: 9149

7510 digitizer

hi, when using the digitizer and "auto range" when does the range selection is done?

Go to advanced search