Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 5 matches

by dlock4
May 10th, 2017, 11:38 am
Forum: Non- Windows Based Oscilloscopes
Topic: MDO3024 FFT for distorsion measurement
Replies: 0
Views: 6564

MDO3024 FFT for distorsion measurement

I want to measure distortion of simple audio signal (1KHz). I want to use FFT on the audio signal and measure harmonics. The VISA Command used are: SEARCH:SEARCH1:STATE ON SEARCH:SEARCH1:TRIGGER:A:TYPE EDGE SEARCH:SEARCH1:TRIGGER:A:EDGE:SLOPE RISE SEARCH:SEARCH1:TRIGGER:A:EDGE:SOURCE CH1 SEARCH:SEAR...
by dlock4
October 5th, 2016, 5:06 am
Forum: Non- Windows Based Oscilloscopes
Topic: Fine vertical scale in differential mode
Replies: 3
Views: 13319

Re: Fine vertical scale in differential mode

Hi,
I not sure of the answer. If my vertical scale for CH1 and CH2 are set a 1.3V, why my math scales is at 1.0V? (see - below)
by dlock4
October 3rd, 2016, 6:42 am
Forum: Non- Windows Based Oscilloscopes
Topic: Fine vertical scale in differential mode
Replies: 3
Views: 13319

Fine vertical scale in differential mode

I would like to know if the fine vertical scale work in differential mode? I have MDO3024 scope and I unable to adjust the fine vertical scale when I make measurement in differential mode. I able to set the fine scale for CH1 and CH2, but the scale for differential mode (CH1-CH2) do not change to fi...
by dlock4
September 30th, 2016, 11:02 am
Forum: Programming Support
Topic: MDO3024 Slow on measurements
Replies: 1
Views: 9185

MDO3024 Slow on measurements

We have developed a driver for take measurement for ARINC429 signals. The driver has been developed for 2 types of oscilloscope, the old Agilent MSO6052A and the new Tektronix MDO3024 The test duration for take measurement on MSO6052A is 1.433 secs The test duration for take measurement on MDO3024 i...
by dlock4
September 6th, 2016, 11:30 am
Forum: Programming Support
Topic: MDO3024 Teststand IVI read command generate timeout
Replies: 1
Views: 9589

MDO3024 Teststand IVI read command generate timeout

I have MDO3024 controlled by teststand 2014 and IVI driver(Ni-max). I using the latest IVI driver tkdpo2k3k4k IVI Driver 1.4.0. I could acquire waveform from the oscilloscope using IVI command INITIATE and FETCH, but the IVI command READ generate a timeout (see -). Why the read command generate a Ti...

Go to advanced search