Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 29 matches

by JBrown54
March 10th, 2021, 1:31 pm
Forum: DAQ6510 Data Acquisition and Logging Multimeter System
Topic: Multi-Function Control App Now Available
Replies: 0
Views: 66

Multi-Function Control App Now Available

Keithley is proud to introduce its latest TSP App for use with the DAQ6510. This app is tailored to work with the Model 7706 All-in-one multiplexer module, providing touchscreen access to directly configure/control the digital outputs, analog outputs, and totalizer. The app screens for availability ...
by JBrown54
February 15th, 2021, 8:58 am
Forum: DAQ6510 Data Acquisition and Logging Multimeter System
Topic: Matrix Control App Available on GitHub
Replies: 1
Views: 57

Matrix Control App Available on GitHub

Keithley is proud to introduce its latest TSP App for use with the DAQ6510. This app is tailored to work with the Model 7709 6x8 matrix module, providing a basic layout similar to what can be seen in the simplified diagram found in the card User Manual. App screens for availability of 7709 in slot 1...
by JBrown54
March 10th, 2020, 1:15 pm
Forum: DMM6500 Bench/System DMM
Topic: DMM6500/DAQ6510 Voltage Measurement bug
Replies: 2
Views: 1689

Re: DMM6500/DAQ6510 Voltage Measurement bug

Apologies for the delay in response. In short, this is not a bug but a deficiency in documenting the proper application/usage of the Secondary function. Because no barriers were put up to prevent the DCV+DCI pairing it was assumed that this would be applicable without any impact to performance. This...
by JBrown54
March 10th, 2020, 12:44 pm
Forum: DMM6500 Bench/System DMM
Topic: DMM6500 errors
Replies: 11
Views: 2530

Re: DMM6500 errors

How long have you had this unit? Imagine it would be covered under warranty.
by JBrown54
March 10th, 2020, 12:42 pm
Forum: DMM6500 Bench/System DMM
Topic: How do I set min boundary scale in Histogram mode
Replies: 1
Views: 342

Re: How do I set min boundary scale in Histogram mode

What is your current ranges? As low as x; as much as y? Thanks
by JBrown54
March 10th, 2020, 12:39 pm
Forum: KickStart
Topic: KickStart formulator
Replies: 1
Views: 393

Re: KickStart formulator

We have this logged as a future improvement, but to date there is no schedule of when this might be expected.
by JBrown54
March 10th, 2020, 12:37 pm
Forum: KickStart
Topic: "KickStart has stopped working" message
Replies: 3
Views: 478

Re: "KickStart has stopped working" message

Sent you a PM.
by JBrown54
March 9th, 2020, 10:09 am
Forum: DMM7510 Graphical Sampling DMM
Topic: How to set a single trigger and extract measurements from buffer
Replies: 1
Views: 346

Re: How to set a single trigger and extract measurements from buffer

Is the readback measurement 1e38 or 9.9998e37? This would indicate an overflow or over-range condition. What is the anticipated signal level?
by JBrown54
March 9th, 2020, 10:02 am
Forum: KickStart
Topic: "KickStart has stopped working" message
Replies: 3
Views: 478

Re: "KickStart has stopped working" message

A couple questions: 1. Is this the same test that has been running for months or are you encountering new errors for new runs? 2. How many runs are captured in the Run History for a single project? 3. Are you able to share all the data logger settings or can you share the KS project via email? 4. Wh...
by JBrown54
July 15th, 2019, 6:49 am
Forum: Series 3700 Switch System/Multimeter and Plug-In Cards
Topic: 3706A MTBF?
Replies: 1
Views: 1610

Re: 3706A MTBF?

I've sent out a request to factory design and audit team member to see if we have some numbers available.
by JBrown54
December 4th, 2018, 3:18 am
Forum: DAQ6510 Data Acquisition and Logging Multimeter System
Topic: DAQ6510 Script to Control TestEquity Environmental Chambers
Replies: 0
Views: 3400

DAQ6510 Script to Control TestEquity Environmental Chambers

Monitoring the conditions (temperature, voltage, etc.) of your device under test (DUT) is made easy with the DAQ6510, but what about automating the setup of environmental conditions? This is a definite possibility when pairing the DAQ with one of the TestEquity environmental chambers. In this latest...
by JBrown54
September 11th, 2018, 6:15 am
Forum: Other DMM's
Topic: DMM2040 Serial Number
Replies: 2
Views: 9566

Re: DMM2040 Serial Number

Can you provide a - of the DMM2040? I'm not seeing this particular model in our inventory.
by JBrown54
September 11th, 2018, 6:06 am
Forum: Electronic Loads
Topic: FYI... Keithley 2380 - Extra Step to Full Remote Operation
Replies: 1
Views: 5934

FYI... Keithley 2380 - Extra Step to Full Remote Operation

It is not abundantly clear in the programming manual, but there are some additional commands you should be aware of when writing your automation code for remotely controlling your 2380 DC Electronic Load. SYSTem:REMote //This command sets the electronic load to remote control mode. SYSTem:LOCal // T...
by JBrown54
September 11th, 2018, 5:55 am
Forum: Electronic Loads
Topic: FYI... Keithley 2380 - Using the Remote Sense Feature
Replies: 0
Views: 3936

FYI... Keithley 2380 - Using the Remote Sense Feature

We had a customer let us know that the SYSTem:SENSe:STATe command - for enabling/disabling the remote sense feature - was not working. We confirmed this. The correct commands for set and query, unfortunately found to be undocumented to date, are as follows: [SOURce:]REMote:SENSe[:STATe] 0|1|ON|OFF [...
by JBrown54
September 11th, 2018, 5:44 am
Forum: DAQ6510 Data Acquisition and Logging Multimeter System
Topic: starting further scans while another one is already running
Replies: 3
Views: 6654

Re: starting further scans while another one is already running

Unfortunately, no - no way to augment an active scan without interruption. This is due to buffer sizing and memory allocation/organization. The last thing we want to do is to corrupt your data in any way. Some things to consider... First, if your scan is not running excessively or having a Scan to S...
by JBrown54
August 2nd, 2018, 6:35 am
Forum: Series 2200 Programmable DC Power Supplies
Topic: Model 2231A-30-3 Python Programming Example
Replies: 1
Views: 8376

Re: Model 2231A-30-3 Python Programming Example

This same example code is provided in a GitHub repository as well in the event that anyone wants to help grow/enhance its usefulness. Thanks

https://github.com/tektronixofficial/Ke ... A_Examples
by JBrown54
August 2nd, 2018, 6:33 am
Forum: Series 2200 Programmable DC Power Supplies
Topic: Model 2231A-30-3 Python Programming Example
Replies: 1
Views: 8376

Model 2231A-30-3 Python Programming Example

We had to address an application involving using the 2231A and I used Python + PyVISA to control. No point on sitting on working code when someone might make use of it. The example is very simple and provides the following: * Connect to the instrument * Disconnect from the instrument * Select channe...
by JBrown54
August 2nd, 2018, 6:26 am
Forum: Series 2200 Programmable DC Power Supplies
Topic: 2231A-30-3 LabView programming
Replies: 2
Views: 10521

Re: 2231A-30-3 LabView programming

Something to note as well: the LabVIEW driver that we have made available via tek.com at the 2220/2230/2231 page states that it is for Models 2220 and 2230. In testing this out at my bench, I had usage/connectivity issues when attempting to use with the 2231A - I got failures/error from the Initiali...
by JBrown54
July 24th, 2018, 3:35 pm
Forum: DMM6500 Bench/System DMM
Topic: How to measure mAh
Replies: 2
Views: 5774

Re: How to measure mAh

Hi, M. I copy/pasted the code from the Application Note and did see room for improvement (there was a comment that had a single "-" when it should have been a double "-", and some comments that wrapped around where they should not per copy from PDF), however this example is running as expected for b...

Go to advanced search