Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 4 matches

by richjohnson
January 11th, 2018, 9:15 am
Forum: RSA5000/6000 Series
Topic: RSA6100A Load Table 2, Table 3 correction file from PC
Replies: 2
Views: 7235

Re: RSA6100A Load Table 2, Table 3 correction file from PC

OK, this command loads a Table 1, 2 or 3 csv correction file located on the RSA HD drive. So my title needs to be corrected to "correction file from RSA". I also noticed, if I use the RSA GUI Correction File Editor and load a correction to Table 2 or Table 3, a subsequent MMEM:CAL:LOAD:CORR:EXT:EDIT...
by richjohnson
January 11th, 2018, 8:38 am
Forum: RSA5000/6000 Series
Topic: RSA6100A Load Table 2, Table 3 correction file from PC
Replies: 2
Views: 7235

RSA6100A Load Table 2, Table 3 correction file from PC

This command only loads to Ext Loss Table 1. If the command is set to EDIT2 (Table 2) or EDIT3 (Table 3), the command loads Loss Table 1 as if EDIT1 is the command.

MMEMory:CALibration:LOAD:CORRection:EXTernal:EDIT<x> (No Query Form).

Not a show stopper but I want to confirm this operation.

Rich J
by richjohnson
January 10th, 2018, 6:49 am
Forum: RSA5000/6000 Series
Topic: RSA 6100A Calibration Correction Table
Replies: 2
Views: 6436

Re: RSA 6100A Calibration Correction Table

Looks like there is Calibration (aka Alignment) correction and an Input correction. I tried Input correction and it works. Here's the Programmer Manual paste of the command. INPut:CORRection:EXTernal:EDIT<x>:NEW INPut:CORRection:EXTernal:EDIT<x>:NEW <freq(1)>,<gain(1)>,<freq(2)>,<gain(2)>,...,<freq(...
by richjohnson
January 9th, 2018, 1:14 pm
Forum: RSA5000/6000 Series
Topic: RSA 6100A Calibration Correction Table
Replies: 2
Views: 6436

RSA 6100A Calibration Correction Table

This command results in error "Command not recognized", when attempting to create a new correction file. The command is terminated with a Line Feed. I've tried all kinds of variations but still fails. A Tek support guy says the command works on his RSA6100B but I'm using RSA6100A, 32bit. This comman...

Go to advanced search