Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 4 matches

by bergmiis
April 3rd, 2019, 9:25 pm
Forum: Series 2700 Multimeter/Data Aquisition/Switch System
Topic: 2701 with 7700: Error "ICE2700_ATTR_FRONT_PANEL_LOCKOUT"
Replies: 4
Views: 5131

Re: 2701 with 7700: Error "ICE2700_ATTR_FRONT_PANEL_LOCKOUT"

Hi Jennifer, thanks for your replay. I could make some improvements but still lose my connection after quite a short time: https://forum.tek.com/viewtopic.php?f=283&t=141562 Some minutes ago I sent my project and details of my 2701 to the e-mail address Joe mentioned. Hopefully you can help. Regards...
by bergmiis
March 28th, 2019, 7:27 am
Forum: KickStart
Topic: KickStart 2.0.6 with 2701: several errors and measurement terminated
Replies: 2
Views: 3805

KickStart 2.0.6 with 2701: several errors and measurement terminated

I installed KickStart 2.0.6, the 2701 is directly connected to the PC via ethernet (crossover). The 2701 is not detected automatically, I must always enter the IP address. But I can live with that. What is really bad: After several minutes of measuring the measurement is terminated. I don't know if ...
by bergmiis
March 27th, 2019, 7:46 am
Forum: Series 2700 Multimeter/Data Aquisition/Switch System
Topic: 2701 with 7700: Error "ICE2700_ATTR_FRONT_PANEL_LOCKOUT"
Replies: 4
Views: 5131

Re: 2701 with 7700: Error "ICE2700_ATTR_FRONT_PANEL_LOCKOUT"

I installed KickStart 2.0.6, the 2701 is now directly conneted to the PC via ethernet (direct cable connection between 2701 and PC). KickStart does not recognise the device. I also tried it with the IP that I can see when I switch on the 2701. I find nothing how to configure the 2701 to be detected ...
by bergmiis
March 26th, 2019, 6:40 am
Forum: Series 2700 Multimeter/Data Aquisition/Switch System
Topic: 2701 with 7700: Error "ICE2700_ATTR_FRONT_PANEL_LOCKOUT"
Replies: 4
Views: 5131

2701 with 7700: Error "ICE2700_ATTR_FRONT_PANEL_LOCKOUT"

I'm using a 2701 with a 7700 via RS232 an EceLINX reading 12 channels all 5 min. Configuring works fine, no errors. The scanning runs for about 15 min to 4 hours and then it stops with "ICE2700_ATTR_FRONT_PANEL_LOCKOUT". I can restart it by switching off and on the 2701, configuring again and start ...

Go to advanced search