Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 11 matches

by Mickael B
August 20th, 2013, 3:46 am
Forum: Series 3700 Switch System/Multimeter and Plug-In Cards
Topic: get out of scanstate = scan.FAILED
Replies: 2
Views: 14747

Re: get out of scanstate = scan.FAILED

Hello, Have you checked LAN connection? that could explain why ICL (reset()) commands doesn't not work. May be LAN connection failed and you need to open a dead socket connection (port 5030) to clear and reinitialize socket and LAN capabilities. then re open the standard port you use (5025). Hope th...
by Mickael B
December 11th, 2012, 3:52 am
Forum: 2600 Series SourceMeter
Topic: generating long array?
Replies: 3
Views: 15887

Re: generating long array?

Hello,

Input buffer size should be 1024 characters, no more.
You can use several lists, each one used in a sweep list function, there will be few ms between sweep lists at least (time to re arm sweep).
Let me know if I can help you more.

Regards,

Mickael
by Mickael B
June 11th, 2012, 1:09 am
Forum: Keithley DAQ Data Aquisition Products
Topic: KUSB 3100 problem of input and output ranges
Replies: 1
Views: 11153

Re: KUSB 3100 problem of input and output ranges

Hello,

Sorry but your KUSB-3100 module is probably damaged.
Please be in touch with a keithley repair center.

mickael
by Mickael B
January 27th, 2012, 5:33 am
Forum: Series 3700 Switch System/Multimeter and Plug-In Cards
Topic: 3706 backplane scan VB
Replies: 3
Views: 16710

Re: 3706 backplane scan VB

Dear Mr Reichhart, Find here attached an Excel VBA program + a TSP script. First, you have to create a pseudo card at slot 1: please use the following ICL command, slot[1].pseudocard = slot.PSEUDO_3720. And then, with the VBA Program, please follow the next steps: 1.Click on Connect. A window is dis...
by Mickael B
January 4th, 2012, 6:54 am
Forum: 2600 Series SourceMeter
Topic: A Labview VI for sourcing current on 2612A
Replies: 2
Views: 13413

Re: A Labview VI for sourcing current on 2612A

Hello Mr Razouk,

Find here with a script file to output a 100 ms width current pulse.
Please kindly save the script in the internal memory of you SourceMeter.
From Labview, call and run the script every 4 hours.

Regards,

Mickael
by Mickael B
January 4th, 2012, 4:59 am
Forum: 2400 Series SourceMeter
Topic: emergency stop
Replies: 1
Views: 9940

Re: emergency stop

Hi LV_apprentice,

It must be an hardware emergency stop, not a software one. So please introduce and work on a hardware interlock solution.
For safety reasons, a software emergency can't replace an hardware interlock.

Regards,

Mickael
by Mickael B
November 23rd, 2011, 7:33 am
Forum: Test Script Builder
Topic: Need readings on RS-232 port
Replies: 2
Views: 15921

Re: Need readings on RS-232 port

Hello, you should check first the data format you have specified. If not specified, please send the following SCPI command FORMat:ASCii to specify it. Format for transferring data could be ASCII, SREAL, REAL32, REAL64... To get readable data, you should select ASCii format. Hope this can help you. L...
by Mickael B
November 23rd, 2011, 7:16 am
Forum: Keithley DAQ Data Aquisition Products
Topic: KUSB-488B IEEE-488.2 USB-to-GPIB Interface Adapter for USB
Replies: 1
Views: 11358

Re: KUSB-488B IEEE-488.2 USB-to-GPIB Interface Adapter for U

Hi Bo, I have never experienced that. Please tell me what kind of KUSB-488B drivers rev you are using. Latest release is 3.06 rev.if you are using an older one, please upgrade it with the latest rev. Please use also Keithley tools (Keithley configuration tools) to be sure you can control each instru...
by Mickael B
August 22nd, 2011, 7:23 am
Forum: Nanotechnology Measurements
Topic: Spin Valve differential conductance measurement
Replies: 1
Views: 14001

Re: Spin Valve differential conductance measurement

You should use built in triggering functionnalities of our models 6220 and 2182. In remote mode, once a current level is settled, a pulse is outputted (action completed). This pulse can be used to trigger a voltage measurement on the nanovoltmeter (measurements stored in the buffer). This means that...
by Mickael B
August 19th, 2011, 6:41 am
Forum: 2600 Series SourceMeter
Topic: Scripting using labview
Replies: 1
Views: 10609

Re: Scripting using labview

Please first use the short script I share with you and load it with labview. loadscript myscript display.clear() display.settext("Start Script") delay(10) display.clear() display.settext("..........") delay(10) display.clear() display.settext("Stop Script") display.clear() display.settext("End") end...
by Mickael B
August 19th, 2011, 4:06 am
Forum: Keithley DAQ Data Aquisition Products
Topic: Installing KPCI-3140 board
Replies: 3
Views: 16801

Re: Installing KPCI-3140 board

The KPCI-3140 board is a set of counters and digital IO. With that board, sure you can perform frequency measurements on analog signals. Please find and use the VB progam delivered (driverlinx directory on your C drive, folder source then VB) when you install Driverlinx. Unknown signal on pin 11 (C/...

Go to advanced search