Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Search found 8 matches

by aybars
October 3rd, 2012, 12:40 am
Forum: Instrument Accessories & GPIB
Topic: LabTracer(old) - KUSB-488B Problem
Replies: 4
Views: 17556

Re: LabTracer(old) - KUSB-488B Problem

Is there any solution for this problem?
by aybars
September 24th, 2012, 2:00 am
Forum: Instrument Accessories & GPIB
Topic: LabTracer(old) - KUSB-488B Problem
Replies: 4
Views: 17556

Re: LabTracer(old) - KUSB-488B Problem

I tried the new version but still i cant use the program. Here is the error -. I was using this old versio for a long time, old version saves the documents as *klt format, new version saves *kpf format. So i cant use old documents with the new version. http://forum.keithley.com/phpBB3/viewtopic.php?...
by aybars
September 20th, 2012, 3:16 am
Forum: Instrument Accessories & GPIB
Topic: LabTracer(old) - KUSB-488B Problem
Replies: 4
Views: 17556

Re: LabTracer(old) - KUSB-488B Problem

I also tried with both dirvers of KUSB-488B. I installed NI Compatible and Keithley Compatible but still the same error shown
by aybars
September 18th, 2012, 1:23 am
Forum: Instrument Accessories & GPIB
Topic: LabTracer(old) - KUSB-488B Problem
Replies: 4
Views: 17556

LabTracer(old) - KUSB-488B Problem

There is a problem with LabTracer and KUSB-488B. It shows this problem when i try to use them together. What should i do now?
by aybars
September 18th, 2012, 12:37 am
Forum: 2400 Series SourceMeter
Topic: LabTracer Version Problem
Replies: 1
Views: 8477

LabTracer Version Problem

I have some test documents saved from LabTracer old version. These documents saved as *klt format. I cant open them with LabTracer 2.0 versions. When i try to open error says "Not Enough Memory" . The new version to save the test is *kpf . Is there any option to use *klt versions with LabTracer 2.0 ...
by aybars
July 21st, 2011, 4:37 am
Forum: Series 2700 Multimeter/Data Aquisition/Switch System
Topic: How to add delay time between scan cycles?
Replies: 1
Views: 9344

How to add delay time between scan cycles?

Hi, I need to add some delay time between scanning 20 channels. In example while using 2700 or 2701 with any 77XX card, i want to scan 20 channels for 15 cycles. But between every cycle i want to add some delay time, like 30 seconds or 5 min, it depends. I searched manuals also ExeLINX but i coulnd'...
by aybars
July 21st, 2011, 4:17 am
Forum: Series 2700 Multimeter/Data Aquisition/Switch System
Topic: Hi-speed current measurement with 2701/7710
Replies: 2
Views: 11449

Re: Hi-speed current measurement with 2701/7710

Thanks for information. I found something about 4-20 mA Loop Primer, you can check the link. http://www.pacontrol.com/download/4-20mA-Current-Loop-Primer.pdf And why i wanted to choose 7710 is measuring speed. I see 7700 switching speed is <3ms but when you increase the digits and also if you want t...
by aybars
June 30th, 2011, 8:16 am
Forum: Series 2700 Multimeter/Data Aquisition/Switch System
Topic: Hi-speed current measurement with 2701/7710
Replies: 2
Views: 11449

Hi-speed current measurement with 2701/7710

I need to measure 3-channels 0-10 V voltage and 3-channels 4-20 mA current by using data loggers. From a trasnducer output, the measurement speed is approx 100ms/rdgs. And also the device should be able to carry. So i decided to use 2701 with 7710. But for current measurement i guess i need to use s...

Go to advanced search