Page 1 of 1

2400 Overtemp error

Posted: January 20th, 2011, 8:02 am
by Strider
I have a Model 2400 that intermittently shows Overtemp error.
The unit is warm to the touch but not "hot".
I can cycle power to the unit and it clears the condition.
What is going on?

Re: 2400 Overtemp error

Posted: January 20th, 2011, 8:07 am
by Dale C
Revision C32 has resolved this issue.
Go to the Keithley web site and down load the FlashWizard program and the C32 firmware.
Run FlashWizard and when prompted enter the C32 firmware file.
One note... Do not interrupt line power to the unit while upgrading firmware.