Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Stop at compliance without sweep

Models 2400, 2401, 2410, 2420, 2425, 2430, 2440, 6430
Post Reply
noddle
Posts: 1
Joined: March 31st, 2011, 11:52 pm
Country: Netherlands

Stop at compliance without sweep

Post by noddle » April 1st, 2011, 12:03 am

Hi,
I use Keithley 2410 source-meter to do TDDB measurement. I want this source-meter stop at current compliance.

I have tried to put this code

:STAT:MEAS:ENAB 16384
*SRE 1
:ABOR
:STAT:MEAS?
*SRE 0

but it didnot work. Any help would be greatly appreciated.

Dale C
Keithley Applications
Keithley Applications
Posts: 2849
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Re: Stop at compliance without sweep

Post by Dale C » April 1st, 2011, 7:34 am

Are you doing a sweep?
If so then use the compliance abort command.
:SOURCE:SWEEP:CABORT (NEVER,EARLY or LATE).
If not using a sweep then you could also use the trip command.
:SENSE:CURRENT:PROTECTION:TRIPPED?
This would return a yes(1) or no(0) when addressed to talk.

Post Reply

Return to “2400 Series SourceMeter”

Who is online

Users browsing this forum: No registered users and 4 guests