Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Sweep on 1 2400 while measuring continuously on the other

Models 2400, 2401, 2410, 2420, 2425, 2430, 2440, 6430
Post Reply
Posts: 1
Joined: April 1st, 2011, 8:46 am
Country: United States

Sweep on 1 2400 while measuring continuously on the other

Post by peterdeeb » April 1st, 2011, 8:58 am

I'm using 2 2400's. One will be performing a sweep as fast as I can make it go. I need to try and measure the current for a second 2400 starting the same time. I don't know if this is possible but if it is how would I accomplish it. Pseudo code would be good as I'm doing this in Measurement Studio with GPIB commands. I've been playing with setting up a trigger link manually but don't have much experience with it so am not having much success.

Andrea C
Keithley Applications
Keithley Applications
Posts: 1436
Joined: October 15th, 2010, 10:35 am
Country: United States

Re: Sweep on 1 2400 while measuring continuously on the othe

Post by Andrea C » April 7th, 2011, 3:05 pm


Check out the app note on the web site for "Trigger Synchronization of Multiple Series 2400":


There are a couple different scenarios covered and the SCPI commands are included.


Post Reply

Return to “2400 Series SourceMeter”

Who is online

Users browsing this forum: No registered users and 7 guests