Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Connecting 2400 to PC via RS232

Models 2400, 2401, 2410, 2420, 2425, 2430, 2440, 6430
Post Reply
Ochai000
Posts: 4
Joined: July 13th, 2011, 3:39 am
Country: United Kingdom

Connecting 2400 to PC via RS232

Post by Ochai000 » July 13th, 2011, 3:49 am

Hi,
I have tried connecting the model 2400 to my PC using an RS232 via a USB to RS232 converter. And there seem to be no connection established. What could be the problem?

Ochai

Nathan S
Keithley Applications
Keithley Applications
Posts: 254
Joined: February 28th, 2011, 6:17 am
Country: United States
Contact:

Re: Connecting 2400 to PC via RS232

Post by Nathan S » July 13th, 2011, 5:36 am

Ochai,

We treat an RS-232 to USB converter as a sort of black box. In my previous position at another company, I did run into models or brands that for whatever reason did not work with instrumentation (not just Keithley). At any rate, I'm guessing some sort of software or driver came with the converter, so you need to make sure the cable is meeting the same settings as your 2400, including Baud Rate, Flow Control, Termination Character, etc. And of course, just to be sure, make sure the 2400 is set to RS-232 communication and not GPIB.

garrekds
Posts: 1
Joined: June 7th, 2017, 1:36 am
Country: Japan

Re: Connecting 2400 to PC via RS232

Post by garrekds » June 7th, 2017, 1:40 am

Sorry to reopen this thread, but would anyone happen to know these settings for connecting the 2400 via RS-232 to USB 2.0 or 3.0 mentioned above?

Garrek

Post Reply

Return to “2400 Series SourceMeter”

Who is online

Users browsing this forum: dcribeiro and 3 guests