Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
obj = visa ('vendor', 'rsrcname');
Could you fill in the information of this command for the 2200-71-2 model?
Thanks in advance.
- Keithley Applications
- Posts: 17
- Joined: January 31st, 2011, 10:04 am
- Country: United States
'vendor' = 'keithley'
'rsrcname' = depends on the remote interface you are using. If it is USB, then something like 'USB::0x0699::0x0397::9999999::INSTR'' should be entered. this string contains a serial # specific to your power supply. you can find this information using NI VISA Interactive, TekVisa or Keithley Configurator. If you are using GPIB, then the string is something like "GPIB0::99::INSTR". The 99 number is specific to the GPIB address you set.
Who is online
Users browsing this forum: No registered users and 2 guests