Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

2200-71-1 Matlab VISA Object

2200-20-5, 2200-30-5, 2200-32-3, 2200-60-2, 2200-72-1, 2220-30-1, 2230-30-1
Post Reply
Posts: 1
Joined: May 29th, 2014, 4:43 am
Country: Spain

2200-71-1 Matlab VISA Object

Post by UAB-GS » May 29th, 2014, 4:58 am

In order to create the VISA object in Matlab the instruction takes the form:

obj = visa ('vendor', 'rsrcname');

Could you fill in the information of this command for the 2200-71-2 model?

Thanks in advance.

Qing S
Keithley Applications
Keithley Applications
Posts: 17
Joined: January 31st, 2011, 10:04 am
Country: United States

Re: 2200-71-1 Matlab VISA Object

Post by Qing S » May 29th, 2014, 6:09 am


'vendor' = 'keithley'
'rsrcname' = depends on the remote interface you are using. If it is USB, then something like 'USB::0x0699::0x0397::9999999::INSTR'' should be entered. this string contains a serial # specific to your power supply. you can find this information using NI VISA Interactive, TekVisa or Keithley Configurator. If you are using GPIB, then the string is something like "GPIB0::99::INSTR". The 99 number is specific to the GPIB address you set.


Post Reply

Return to “Series 2200 Programmable DC Power Supplies”

Who is online

Users browsing this forum: No registered users and 1 guest