Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Current Firmware Version for 6517A

Post Reply
RWalker
Posts: 1
Joined: February 12th, 2018, 11:22 am
Country: United States

Current Firmware Version for 6517A

Post by RWalker » February 12th, 2018, 1:46 pm

On all of our 6517A's the sign bit's value is always "-" when the meter is on the 10 nano amp scale and the response format is set to "SRE" or "REAL,32". However the faceplate indication always indicates the correct polarity for the input signal and if the meter's format is set "ASC" the response is always correct as well. Is this a known bug with the old 6517A's and is there a fix for it? All of our meters have a firmware revision of C05 A02.

RW

Post Reply

Return to “Low Current Measurements”

Who is online

Users browsing this forum: No registered users and 1 guest