Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Labview driver

Post Reply
ak47raj
Posts: 7
Joined: May 22nd, 2015, 3:08 am
Country: Germany

Labview driver

Post by ak47raj » July 31st, 2015, 2:06 am

I am using a 6485 - and want to control it using NI Labview over an RS-232 cable (ending in RS-232 to USB connector).
I have all drivers from Keithley, which ones do I need from NI?
Urgent response sought!
"All that spirits desire, spirits attain"

brian.d.smith
Keithley Applications
Keithley Applications
Posts: 402
Joined: June 10th, 2013, 6:00 am
Country: United States

Re: Labview driver

Post by brian.d.smith » July 31st, 2015, 9:27 am

The Labview driver is here

http://www.keithley.com/support/keidoc_ ... m_type=All

You will also need the Keithley I/O layer found at the same web page

ak47raj
Posts: 7
Joined: May 22nd, 2015, 3:08 am
Country: Germany

Re: Labview driver

Post by ak47raj » August 13th, 2015, 5:37 am

Hello Brian.

Is there a manual for the driver? I am trying to make real time graphical output programme and am finding some issues in understanding the driver functions.
Please respond urgently

Thanks
"All that spirits desire, spirits attain"

mackjackson
Posts: 1
Joined: February 11th, 2016, 4:20 am
Country: United Kingdom

Re: Labview driver

Post by mackjackson » February 11th, 2016, 4:36 am

According to me., As my knowledge there is no manual labview driver.

Dale C
Keithley Applications
Keithley Applications
Posts: 2849
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Re: Labview driver

Post by Dale C » February 11th, 2016, 6:47 am

That is correct. There is no manual for the driver.

Post Reply

Return to “Low Current Measurements”

Who is online

Users browsing this forum: No registered users and 2 guests