Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
i want to measure 4..20 mA (dc) with a current shunt of 100 ohm. There are a lot of expensive precision shunts with less than 5 ppm accuracy, but i only need 50 ppm for my application. A 50 ppm Resistance is comparatively cheap. For example:
http://www.mouser.de/ProductDetail/Vish ... WOUB8YC20=
Would such a resistance be suitable or is the selfheating too high? (Power Rating = 0,6 W; P = RI² = 100 ohm * 0,02² A² = 0,04 W)
Who is online
Users browsing this forum: No registered users and 3 guests