Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
What if I want to generate many set pulses followed by many reset pulses? How can I do that? The modules like reramSweep limits you with only one set and one reset pulse. How can I modify to apply set of set pulses and followed sequentially by a set of reset pulses.
Appreciate your help!
- Keithley Applications
- Posts: 402
- Joined: June 10th, 2013, 6:00 am
- Country: United States
In the NVM examples he is assuming that the SMU is linked to the RPM and all the modules work properly like reramForming, reramSweep, reramEndurance ,,, etc. Although this module provide very reasonable results, however, it did not give you any chance to have multiple sequential set and reset pulses!!!
Going to the SegARB modules and examples I am surprised that he is assuming that the SMU should not be linked to the RPM !!!, I also noted that he is not mentioning anything about the Ilimit feature supported readily by the RPM so not allow you to put compliance limit
I tried to use the module but unfortunately I ended by the following nonsense results shape of the pulse on Ch1 shape of the pulse on Ch2
The output results results did not vary whether there is a DUT or no!!! This makes me loose confidence in the SegARB module, please is there is any other ways/methods to apply multiple sequential pulses?
Really appreciate your help!
Who is online
Users browsing this forum: No registered users and 1 guest