Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

increase sample rate to measure current with Keithely 2450

Model 2450, 2460
Post Reply
fk5747
Posts: 1
Joined: August 21st, 2019, 11:01 pm
Country: Norway

increase sample rate to measure current with Keithely 2450

Post by fk5747 » August 22nd, 2019, 1:10 am

Hi,

I'm trying to measure current with a Keithley 2450 (LabVIEW 8). The current in sleep mode is around 3uA and has a peak at 9mA and with 0.1ms width, I would like to capture the pulse and especially the peak.
I saw others ask about the Max sample rate for Keitely 2450, but I haven't found the answer. I am sending SCPI command in my LabVIEW code, I have set the NPLC to 0.01,
turn off the Auto range and Average, but still I have the interval between samples around 3ms which is too low. Is there any way to increase it?

(And I am using Keithley drivers)



I appreciate any help.

Thanks.

Post Reply

Return to “2450/2460 Touchscreen SourceMeter”

Who is online

Users browsing this forum: No registered users and 1 guest