Time issue

2000, 2001, 2002, 2010, 2100, 2110
Post Reply
kelcmd
Posts: 3
Joined: July 16th, 2015, 11:55 am
Country: United States

Time issue

Post by kelcmd » July 17th, 2015, 10:55 am

Hello,

I have issue with dumping 1000 data points onto my computer at a rate of 500 R/s. I take the readings over GPIB into Matlab, and it takes approximately 7 seconds for the data to go from the dmm to the computer. Is this an issue with the DMM or just GPIB?

Thank you

Dale C
Keithley Applications
Keithley Applications
Posts: 2827
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Re: Time issue

Post by Dale C » July 20th, 2015, 2:50 pm

You could use binary transfer mode to increase the data dump rate.
Look in the SCPI section of the manual. And look for the :FORMAT command.
That will show how to use binary transfer for faster rates into the computer.

Post Reply

Return to “Series 2000 and Series 2100 DMM's”

Who is online

Users browsing this forum: No registered users and 1 guest