Re-flash firmware on 2100 DMM

2000, 2001, 2002, 2010, 2100, 2110
Post Reply
giosif
Posts: 8
Joined: September 26th, 2016, 12:07 am
Country: United Kingdom

Re-flash firmware on 2100 DMM

Post by giosif » September 26th, 2016, 5:40 am

Hello,

Can someone please help me with access to the tool that allows one to re-flash the firmware on a 2100 DMM, even when the meter is already at the latest firmware version available?

Also, is there a memory clearing/santizing procedure for the 2100 model?
If so, can someone share that as well, please?

Thank you!

Best regards,
George

Dale C
Keithley Applications
Keithley Applications
Posts: 2827
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Re: Re-flash firmware on 2100 DMM

Post by Dale C » September 28th, 2016, 10:39 am

Here is the link for the firmware updgrade.
We do not have the sanitization procedure quite yet. I have made a request to the quality dept so they may generate the procedure.
I will post it when it is ready.
Hope this helps.

http://www.tek.com/product/2100-120-sof ... vision-108

giosif
Posts: 8
Joined: September 26th, 2016, 12:07 am
Country: United Kingdom

Re: Re-flash firmware on 2100 DMM

Post by giosif » September 28th, 2016, 11:54 am

Thanks for the link, Dale, but I already have the latest firmware files!
The problem is my meter already is at that latest version and I am trying to re-install the firmware, but the flash program doesn't let me (it complains that the version I'm trying to install is older than what's on the meter).
Could I have a flash program that doesn't check the existing version on the meter?

Also, thanks for the info on the sanitization procedure!
I will wait for news on that, whenever it becomes available.

Regards,
George

Dale C
Keithley Applications
Keithley Applications
Posts: 2827
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Re: Re-flash firmware on 2100 DMM

Post by Dale C » September 28th, 2016, 12:13 pm

Here is the sanitization procedure.
Attachments
Keithley_2100_data_destruction.pdf
(37.42 KiB) Downloaded 872 times

giosif
Posts: 8
Joined: September 26th, 2016, 12:07 am
Country: United Kingdom

Re: Re-flash firmware on 2100 DMM

Post by giosif » September 28th, 2016, 2:59 pm

Nice!

Any chance for the non-version checking flashing program as well, please?

Thanks,
George

giosif
Posts: 8
Joined: September 26th, 2016, 12:07 am
Country: United Kingdom

Re: Re-flash firmware on 2100 DMM

Post by giosif » September 30th, 2016, 2:03 am

giosif wrote:Nice!

Any chance for the non-version checking flashing program as well, please?

Thanks,
George
Any chance of getting this, please?

Post Reply

Return to “Series 2000 and Series 2100 DMM's”

Who is online

Users browsing this forum: No registered users and 1 guest