2000 DMM - VB Code Exampels needed
2000 DMM - VB Code Exampels needed
Do you have any sample code (preferably visual basic) on how to pull data off of a 2000DMM or a 2400 SMU in binary mode over GPIB and convert it to floats? Lets say I have the FORM configured for *voltage* and *current*. Thx
-
- Keithley Applications
- Posts: 2842
- Joined: June 10th, 2010, 6:22 am
- Country: United States
- Contact:
Re: 2000 DMM - VB Code Exampels needed
All known example programs are on the Keithley web site.
There are some VB examples but may not do exactly what is required. Think of them as building blocks to start your program.
Getting data from the 2000 or 2400 buffer normally uses the :TRACE SCPI commands.
Dealing with binary uses the FORMAT:DATA SREAL commands
Here is the link to the example programs.
http://www.keithley.com/support/keidoc_ ... le+Program
There are some VB examples but may not do exactly what is required. Think of them as building blocks to start your program.
Getting data from the 2000 or 2400 buffer normally uses the :TRACE SCPI commands.
Dealing with binary uses the FORMAT:DATA SREAL commands
Here is the link to the example programs.
http://www.keithley.com/support/keidoc_ ... le+Program
Re: 2000 DMM - VB Code Exampels needed
This link does not yield any results.
Does anybody have an example VB.net code for using a KE2000 DMM? All I need is to take a 4-wire resistance reading. Thanks in advance to anybody that can help!
LB
Does anybody have an example VB.net code for using a KE2000 DMM? All I need is to take a 4-wire resistance reading. Thanks in advance to anybody that can help!
LB
-
- Posts: 1
- Joined: March 9th, 2018, 1:17 pm
- Country: United States
Re: 2000 DMM - VB Code Exampels needed
Guys, the link for VB examples seems to be dead, please, please I urgently need ANY rs232 code that there is around, I want to make my own code and only need some code to check as reference...
Thanks!!
Mauricio
Thanks!!
Mauricio
Who is online
Users browsing this forum: No registered users and 1 guest