Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Secondary Measurements from DMM7510

DMM7510 7½-Digit Graphical Sampling Multimeter
Forum rules
<t></t>
Post Reply
CH2009
Posts: 8
Joined: October 13th, 2015, 11:01 am
Country: France

Secondary Measurements from DMM7510

Post by CH2009 » October 13th, 2015, 11:11 am

Hello,

I would like to know how use the secondary measurements from a DMM7510. Is it possible to measure simultaneously (or alternatively from switch mode) temperature from a thermocouple and a voltage? how to plug the two separate DUT to the DMM?

Thanks in advance

Andrea C
Keithley Applications
Keithley Applications
Posts: 1262
Joined: October 15th, 2010, 10:35 am
Country: United States
Contact:

Re: Secondary Measurements from DMM7510

Post by Andrea C » October 14th, 2015, 6:56 am

The DMM7510 has only one channel. The secondary measurement would apply to the same signal source as the primary measurement. For example, you could measure the ACV and Freq of a signal.

CH2009
Posts: 8
Joined: October 13th, 2015, 11:01 am
Country: France

Re: Secondary Measurements from DMM7510

Post by CH2009 » October 14th, 2015, 10:56 am

Thanks for your reply and this information.

Post Reply

Return to “DMM7510 Graphical Sampling DMM”

Who is online

Users browsing this forum: No registered users and 1 guest