Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Pauses when recording a large buffer in Digi V mode

DMM7510 7½-Digit Graphical Sampling Multimeter
Forum rules
<t></t>
Post Reply
Ilya Grudovik
Posts: 40
Joined: October 30th, 2018, 1:54 pm
Country: Belarus

Pauses when recording a large buffer in Digi V mode

Post by Ilya Grudovik » November 29th, 2019, 2:21 am

New firmware 1.7.0. Trying to write a large contiguous buffer (8 000 000 samples) at a time:
Settings:
Digi V + [Freq=1MHz] + [Aperture=1mks] + [count = 8,000,000]
img1129_091159.png
img1129_091159.png (42.66 KiB) Viewed 297 times
When time-critical processes are not implemented on the hardware, but are given to programmers, it’s a disaster :( When the product is more than 5 years old. But he still cannot do a simple operation - write a buffer of a given size with a given frequency. But on the screen you can run the watch and other toys. :oops:

Post Reply

Return to “DMM7510 Graphical Sampling DMM”

Who is online

Users browsing this forum: No registered users and 1 guest