Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

print(display.lightstate) always returns display.STATE_LCD_OFF after power-up

DMM7510 7½-Digit Graphical Sampling Multimeter
Forum rules
<t></t>
Post Reply
Ilya Grudovik
Posts: 40
Joined: October 30th, 2018, 1:54 pm
Country: Belarus

print(display.lightstate) always returns display.STATE_LCD_OFF after power-up

Post by Ilya Grudovik » June 13th, 2020, 8:54 am

print(display.lightstate) always returns display.STATE_LCD_OFF after power-up

At the same time, the device screen is turned on.
This variable starts to work normally only after writing any value to it.
Attachments
lightstate.PNG
lightstate.PNG (4.76 KiB) Viewed 82 times

Post Reply

Return to “DMM7510 Graphical Sampling DMM”

Who is online

Users browsing this forum: No registered users and 1 guest