Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

6485 VI to monitor and dump real time current value with digital filter(averaging) enabling option

2502, 6485, 6487 - Support
Post Reply
sachintaneja
Posts: 1
Joined: January 4th, 2017, 9:31 am
Country: Singapore

6485 VI to monitor and dump real time current value with digital filter(averaging) enabling option

Post by sachintaneja » January 4th, 2017, 9:44 am

hi all,

I am looking for simple VI to log the instantaneous and average current values over GPIB link for 6485 in file for power measurements.

1. averaging option can be enabled or disables.
2. configurable sample rate.


Please share as i am new to VI and there is no example related to this in the 6485 labview examples or please point to any particular thread.

Thanks,
Sachin

brian.d.smith
Keithley Applications
Keithley Applications
Posts: 402
Joined: June 10th, 2013, 6:00 am
Country: United States

Re: 6485 VI to monitor and dump real time current value with digital filter(averaging) enabling option

Post by brian.d.smith » January 5th, 2017, 5:00 am

On Tek.com at the below listed link is a driver that includes an example Labview VI.

http://www.tek.com/specialty-instrument ... -basic-v-0

Post Reply

Return to “PicoAmmeters”

Who is online

Users browsing this forum: No registered users and 2 guests