Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

6430 to pre-amp cable connection

200, 210, 220, 486/7, 60x, 61x, 64x Electrometers
409, 41x, 42x, 44x, 48x -
14x, 18x, 1801 Nanovoltmeters
15x, 18x Null Detectors/Microvoltmeters
Post Reply
chris m
Posts: 1
Joined: August 5th, 2015, 1:51 am
Country: Switzerland

6430 to pre-amp cable connection

Post by chris m » August 5th, 2015, 1:58 am

I am looking for the pin diagram for the 6430 to pre-amp connection. There is no mention of this in the manual. My guess would be that the pins match 1 to 1, i.e pin 1 on the 6430 corresponds to pin 1 on the pre -amp and so on, but would like this confirmed before I make a potentially wrong connection.

Thanks

Dale C
Keithley Applications
Keithley Applications
Posts: 2847
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Re: 6430 to pre-amp cable connection

Post by Dale C » August 5th, 2015, 8:28 am

It is a straight through connection.
So pins 3,4,5,7,8,10,12,1,3,14 and 15 are connected to pins 3,4,5,7,8,10,12,1,3,14 and 15 respectively.

Post Reply

Return to “Older & Obsolete Instruments”

Who is online

Users browsing this forum: No registered users and 1 guest