Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

keithley 7001 will power off with GPIB inserted

7001, 7002 and Switch Cards
Post Reply
coral114379403
Posts: 2
Joined: January 16th, 2011, 8:17 pm
Country: United States

keithley 7001 will power off with GPIB inserted

Post by coral114379403 » January 16th, 2011, 9:48 pm

I am not sure if there is something wrong with my keithley 7001.
when I power on 7001 with Gpib link, the 7001 will power off at once and if I pull off the link, the 7001 will display noraml.
waiting for your suggestions!
thanks! :P

Tom Sw
Keithley Applications
Keithley Applications
Posts: 78
Joined: May 9th, 2010, 12:38 pm
Country: United States

Re: keithley 7001 will power off with GPIB inserted

Post by Tom Sw » January 17th, 2011, 4:06 am

This behavior is not normal. I think you may need to contact Keithley to have this 7001 repaired. Please call 888-KEITHLEY and press 1 to get an RMA.

coral114379403
Posts: 2
Joined: January 16th, 2011, 8:17 pm
Country: United States

Re: keithley 7001 will power off with GPIB inserted

Post by coral114379403 » January 18th, 2011, 7:10 pm

first I am very appreciate your reply, Tom sw!
I will contact with keithley,thanks very much!

Post Reply

Return to “7000 Series Switch”

Who is online

Users browsing this forum: No registered users and 4 guests