Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Most common SCPI commands

7001, 7002 and Switch Cards
Post Reply
Dale C
Keithley Applications
Keithley Applications
Posts: 2849
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Most common SCPI commands

Post by Dale C » September 8th, 2010, 12:07 pm

What are the most common SCPI commands on the 7001 and 7002?

Dale C
Keithley Applications
Keithley Applications
Posts: 2849
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Re: Most common SCPI commands

Post by Dale C » September 8th, 2010, 1:49 pm

1. :ROUTE:CLOSE (@1!1) - This command closes channel 1 on the top card.
2. :ROUTE:OPEN (@1!1) - This command opens channel 1 on the top card.
3. :ROUTE:SCAN (@1!1:1!10) - This command sets up a scan list for channels 1 through 10 on the top card.
4. :TRIG:SOUR TLINK - This command sets up the trigger for each channel as a trigger link input trigger.

Post Reply

Return to “7000 Series Switch”

Who is online

Users browsing this forum: No registered users and 2 guests