Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
Most common SCPI commands
-
Dale C
- Keithley Applications
- Posts: 2849
- Joined: June 10th, 2010, 6:22 am
- Country: United States
- Contact:
Most common SCPI commands
What are the most common SCPI commands on the 7001 and 7002?
-
Dale C
- Keithley Applications
- Posts: 2849
- Joined: June 10th, 2010, 6:22 am
- Country: United States
- Contact:
Re: Most common SCPI commands
1. :ROUTE:CLOSE (@1!1) - This command closes channel 1 on the top card.
2. :ROUTE:OPEN (@1!1) - This command opens channel 1 on the top card.
3. :ROUTE:SCAN (@1!1:1!10) - This command sets up a scan list for channels 1 through 10 on the top card.
4. :TRIG:SOUR TLINK - This command sets up the trigger for each channel as a trigger link input trigger.
2. :ROUTE:OPEN (@1!1) - This command opens channel 1 on the top card.
3. :ROUTE:SCAN (@1!1:1!10) - This command sets up a scan list for channels 1 through 10 on the top card.
4. :TRIG:SOUR TLINK - This command sets up the trigger for each channel as a trigger link input trigger.
Who is online
Users browsing this forum: No registered users and 2 guests