I am looking for information about the DC current capacity of the 7012 4x10 matrix card. I found in the documentation
a specification of 30VA for the contact current rating. I want to be sure this is correct, for example at 5 volts dc you could have a max current of 6 amps ? Thanks...
Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
7012 Switch Card Maximum DC Current.
-
- Keithley Applications
- Posts: 2841
- Joined: June 10th, 2010, 6:22 am
- Country: United States
- Contact:
Re: 7012 Switch Card Maximum DC Current.
The Model 7012 can handle up to 110V and up to 1A. But at maximum of 30VA.
This means you cannot route a 6A signal through the card. It can only handle 1A.
Or if you have 5V it still can only handle to up 1A.
This means you cannot route a 6A signal through the card. It can only handle 1A.
Or if you have 5V it still can only handle to up 1A.
Who is online
Users browsing this forum: No registered users and 3 guests