Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Upgrading the firmware for Keithley 7001

7001, 7002 and Switch Cards
Post Reply
Posts: 2
Joined: June 15th, 2017, 1:39 pm
Country: Brazil

Upgrading the firmware for Keithley 7001

Post by RogerioHein » June 15th, 2017, 3:50 pm


How is the procedure to update the 7001 firmware? Could you send me the latest version? My unit is presenting errors associated to digital board, and the manual says that these errors can be related to firmware version...

Thanks in advance!

Posts: 1
Joined: September 20th, 2017, 7:11 am
Country: Germany

Re: Upgrading the firmware for Keithley 7001

Post by mgross » September 20th, 2017, 7:19 am

the procedure is described in the 7001 Instruction Manual (7001-901-01H.pdf, Page 270). You must burn a EPROM, the EPROM file. The Hexfile can you found at https://doc.xdevs.com/article/keithley-instruments/.

Post Reply

Return to “7000 Series Switch”

Who is online

Users browsing this forum: No registered users and 2 guests