Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

7037-D Card with 7001 Mainframe

7001, 7002 and Switch Cards
Post Reply
supadhyay
Posts: 1
Joined: July 1st, 2011, 7:18 pm
Country: United States

7037-D Card with 7001 Mainframe

Post by supadhyay » July 1st, 2011, 7:30 pm

We are using a 7037-D single pole relay and digital I/O card for both switching and reading digital lines through signals DIG IN 1..10. We are using labview driver to control the relay channels, which works great. The problem is reading the digital lines. How to read the digital lines? The 7001 switch puts out a matrix on the display. But, when we connect a 5V to the DIG IN 1 line, nothing happens on the display. When I scan the channel, I don't see anything happening.

I couldn't find anywhere, how to read the digital lines through 7001 GPIB commands.

Help!

Nathan S
Keithley Applications
Keithley Applications
Posts: 254
Joined: February 28th, 2011, 6:17 am
Country: United States
Contact:

Re: 7037-D Card with 7001 Mainframe

Post by Nathan S » July 5th, 2011, 6:14 am

Below is a link to the 7037 User Manual. Section 5 deals with operation and can explain in more detail than I can. Specifically, I would estimate the main part of what you're looking for would be on page 39-40 of the PDF. Hope this helps.

http://www.keithley.com/support/data?asset=1101

Post Reply

Return to “7000 Series Switch”

Who is online

Users browsing this forum: No registered users and 2 guests