Page 1 of 1

S46 relays and 100V signals

Posted: September 2nd, 2010, 6:11 am
by Dale C
I need to switch up to 100V at around 10uA through the S46 and several of the RF relays.
The total power would be small (e.g. 1mW) but I am concerned about the higher voltage.
Is this going to be a problem?

Re: S46 relays and 100V signals

Posted: September 2nd, 2010, 6:15 am
by Dale C
The relays(SPDT,SP4T and SP6T unterminated and terminated) can handle up to 100V and 10uA with no trouble.