Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

DSA8200 and 80SJNB update

DSA8300, DSA8200
Post Reply
vpham
Posts: 2
Joined: January 21st, 2013, 9:01 am

DSA8200 and 80SJNB update

Post by vpham » January 21st, 2013, 9:09 am

Hi everyone,

Please help, we are thinking of update our DSA8200 and 80SJNB. Please point us out the latest version of the software. Currently, The 80SJB is 2.0.0.0 and for the DSA200 is 5.0.0.5

By the way, where to we check to see the latest version of the two.

Thanks

Chris B
Tektronix Applications
Tektronix Applications
Posts: 657
Joined: December 17th, 2010, 3:17 pm

Re: DSA8200 and 80SJNB update

Post by Chris B » January 21st, 2013, 10:42 am

From the main site at http://www.tek.com, do a search for DSA8200, then you can specify to filter the results to software, and after to firmware or applications.

As of today, the latest TekScope application is 5.1.2.3
http://www.tek.com/oscilloscope/csa8000 ... s-xp-v5123

80SJNB is 3.0.5.0
http://www.tek.com/oscilloscope/dsa8300 ... jarb-v3050

vpham
Posts: 2
Joined: January 21st, 2013, 9:01 am

Re: DSA8200 and 80SJNB update

Post by vpham » January 21st, 2013, 11:25 am

The one your post for the 80SJNB does not compatible for the DSA 8200.

I found out the latest version for the 80SJNB is 2.5.4
http://www.tek.com/oscilloscope/csa8000 ... sjarb-v254

Post Reply

Return to “Sampling Scopes and Modules”

Who is online

Users browsing this forum: No registered users and 2 guests