Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Why has the pulse resistor when I used DSA8300 equipment?

DSA8300, DSA8200
Post Reply
eric0068
Posts: 1
Joined: September 4th, 2020, 4:12 am
Country: China

Why has the pulse resistor when I used DSA8300 equipment?

Post by eric0068 » September 4th, 2020, 6:35 am

As title,
I’m used DSA8300 to measure the wire, but result has a high pulse resistance in the wave frame .
I didn’t any components in this wire.
And could I used TDR to measure the piezoelectric?
I have a device module flex to connect conductive tape and final is piezoelectric, my purpose is confirm the conductive tape resistance.
C7D31E79-1B5E-4039-812E-4E57B0764440.jpeg
Wire result
C7D31E79-1B5E-4039-812E-4E57B0764440.jpeg (16.48 KiB) Viewed 34 times

Post Reply

Return to “Sampling Scopes and Modules”

Who is online

Users browsing this forum: No registered users and 1 guest