Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

AFG 3011C remote control problem

Post Reply
recenary
Posts: 4
Joined: December 30th, 2018, 9:06 pm
Country: Turkey

AFG 3011C remote control problem

Post by recenary » December 30th, 2018, 9:25 pm

Hi,
We are controlling AFG3011C over USB, We are sending the same frequency value, same amplitude value and same load impedance value. Some time later,(After Sending same commands) our unit connected to signal generator starts to read the amplitude level lower or approximately zero. We thought that impedance value or amplitude of the output fails.
Does anybody have an advice?

David N
Tektronix Applications
Tektronix Applications
Posts: 541
Joined: July 31st, 2008, 8:26 am

Re: AFG 3011C remote control problem

Post by David N » January 3rd, 2019, 10:11 am

I would suggest submitting this as formal support request https://www.tek.com/support. Please include the commands used, a copy of the instrument set up file, the AFG f/w version and output signal levels.

Post Reply

Return to “AFG1000/2000/3000 series”

Who is online

Users browsing this forum: No registered users and 1 guest