Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

Where to install colour bands on TPP0101

Post Reply
Suyog
Posts: 4
Joined: September 3rd, 2015, 8:34 am

Where to install colour bands on TPP0101

Post by Suyog » September 3rd, 2015, 8:51 am

Hello
Yesterday I purchased my first oscilloscope - TBS1102B. I have one silly question i have got two TPP0101 probes with my scope, can anyone tell me where should I install colour bands on probe? I haven't find any groove/notch to install band. Sorry for asking stupid question :(

Suyog

David N
Tektronix Applications
Tektronix Applications
Posts: 558
Joined: July 31st, 2008, 8:26 am

Re: Where to install colour bands on TPP0101

Post by David N » September 3rd, 2015, 9:12 am

If you follow the probe cable to the probe body, just after the flex relief you should see a small grove for the color coding ring. Then if you follow the probe cable to the compensation box end, there is another grove just after the flex relief for the other color coding ring. They just snap over the cable into those groves.

Suyog
Posts: 4
Joined: September 3rd, 2015, 8:34 am

Re: Where to install colour bands on TPP0101

Post by Suyog » September 3rd, 2015, 10:08 am

Hiker wrote:If you follow the probe cable to the probe body, just after the flex relief you should see a small grove for the color coding ring. Then if you follow the probe cable to the compensation box end, there is another grove just after the flex relief for the other color coding ring. They just snap over the cable into those groves.
Is this ok now? https://drive.google.com/file/d/0B4kPKs ... sp=sharing

Suyog

David N
Tektronix Applications
Tektronix Applications
Posts: 558
Joined: July 31st, 2008, 8:26 am

Re: Where to install colour bands on TPP0101

Post by David N » September 3rd, 2015, 10:43 am

Yes, you have them installed correctly.

Suyog
Posts: 4
Joined: September 3rd, 2015, 8:34 am

Re: Where to install colour bands on TPP0101

Post by Suyog » September 3rd, 2015, 11:43 am

Hiker wrote:Yes, you have them installed correctly.
Thanks for helping have a nice day :)

Post Reply

Return to “Passive/Low Voltage”

Who is online

Users browsing this forum: No registered users and 1 guest