Page 1 of 1


Posted: April 11th, 2018, 11:47 pm
by jmopto
I would like to test my comm setup operating with RZ coding. The pulse time duration is 10ns, frequency 4MHz. Is it possible with this tester?

Re: BA1500

Posted: April 16th, 2018, 3:14 pm
by Bryan B
BER measurements on the BA1500 have a minimum frequency of 100Kb/s, so yes this tester can go that slow. However the Auto-optimize eye and Physical-layer tests have a minimum frequency of 70Mb/s.