Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
I have a Tektronix 465B scope that I'm using to test a Fender Champ guitar amp. A Tektronix function generator is providing a sine wave input.
The trace appears fine when the probe is on the input jack, but at the triode output on a 12ax7 tube (my second test point in the path) the trace is bouncing up and down slightly at about 3 times a second....about the same rate as the laughing smiley....
The amplitude and frequency do not vary, but the trace appears as if the vertical position control is being turned back and forth quickly. I don't know the technical term for this, and have found no examples.
It behaves like this at all subsequent test points on the amp, whether the probe is at 1x or 10x.
Note: The amp has a 120-cycle hum with the volume turned all the way down with no input, and I'm trying to determine if that is somehow related to the bouncing trace.
What's going on here?
- Keithley Applications
- Posts: 1262
- Joined: October 15th, 2010, 10:35 am
- Country: United States
Who is online
Users browsing this forum: No registered users and 7 guests