Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

channel skew function in AWG7122B

Questions in this forum area are community supported. Tektronix does not regularly monitor or guarantee responses in this area.
Post Reply
Posts: 1
Joined: January 19th, 2015, 6:36 am

channel skew function in AWG7122B

Post by jo.thalbach » January 19th, 2015, 6:55 am


AWG7122B has a function "Channel skew" and the signals can also be shifted with the function "Horizontal shift/rotate". I think these two are similar and can achieve the same effect. Is it true?


David N
Tektronix Applications
Tektronix Applications
Posts: 558
Joined: July 31st, 2008, 8:26 am

Re: channel skew function in AWG7122B

Post by David N » January 21st, 2015, 5:08 pm

These functions are different from each other. The Channel Skew adjustment allows the timing (delay) between two output waveforms to be offset from one another. The Horizontal Shift/Rotate is used when editing a waveform file. It allows a specified range of data in the waveform file to be shifted or rotated.

Post Reply

Return to “Older and Obsolete Signal Sources”

Who is online

Users browsing this forum: No registered users and 3 guests