Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

7904 CRT problems

Post Reply
valvehead003
Posts: 1
Joined: July 3rd, 2021, 11:18 pm
Country: New Zealand

7904 CRT problems

Post by valvehead003 » July 3rd, 2021, 11:41 pm

Hi all. Long time tek scope user but first time poster.
I have a 7904 that I have used for the last 10 years or so and apart from some power supply issues it has been fantastic. I'm hoping that someone here can help with a problem that has developed over a period of a year or so.
At first it started with the power supply taking a few 'bursts' to get going. This got longer and longer but I am sure it's not a psu problem. After a while a hissing noise was audible. Finally it now refuses to get going and there is a strong arc from the anode connector on the crt to the chassis. I have removed the crt and thoroughly cleaned the entire area around the connection and scraped a little of the HV silicone back. I then coated with many layers of Corona dope to try and break the arc. So far nothing has helped. Any advice on how to solve this problem received with thanks.

Post Reply

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 3 guests