Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.
for a couple of years. Today when I have switched it on, after a long
break (almost a year) - it powered OK, all controls seems to be ok,
but there is nothing shown on the CRT.
Can anybody share some tips what can be done to find the cause
and fix it ?
- Tektronix Applications
- Posts: 80
- Joined: December 2nd, 2008, 2:27 pm
- Country: United States
from 1979! It is plain unbelivable that it was working fine until now.
My props to people who build this marvel. The question is if you can buy
today capacitors that would last for another 38 years of service...
I understand that I would need to look for e-caps low/ ultra low ESR,
rated 105C. For sure all small radials will need to be replaced
220uf/10v x 1
1uF/350V x 1
2.2uF/200V x 6
100uf/25v x 2
22uf/25v x 5
10uf/25v x 1
not sure about big fat caps
750uF/200V 85C x 2
and medium yellowish silver
250uf/20v x 8
Practical question, how can I test PSU removed form the unit ? Also,
where are test points to measure the output voltages from the PSU ?
Who is online
Users browsing this forum: No registered users and 11 guests