Tektronix Technical Forums are maintained by community involvement. Feel free to post questions or respond to questions by other members. Should you require a time-sensitive answer, please contact your local Tektronix support center here.

taking 100 DCV measurements with constant duration using Keithley 2700

Post Reply
liuzhiyi18
Posts: 1
Joined: January 15th, 2019, 5:41 am
Country: China

taking 100 DCV measurements with constant duration using Keithley 2700

Post by liuzhiyi18 » January 15th, 2019, 6:00 am

Hi,All:

I want to use Keithley 2700 DMM to take about 100 measurements (DCV, single channel) with a constant time interval. I use SCPI command in MATLAB scripts.

In order to control the time interval, I use the following commands:
======================
TRAC:FEED SENS
TRACe:POINts 100
TRAC:FEED:CONT NEXT
TRIG:COUN 100
TRIG:SOUR TIM
TRIG:TIMer 0.5
SAMP:COUN 1
READ?
=====================
However, the PC will receive only the latest reading.
How can I store all the 100 readings into the internal buffer, and receive all of them after the measurements?

Dale C
Keithley Applications
Keithley Applications
Posts: 2840
Joined: June 10th, 2010, 6:22 am
Country: United States
Contact:

Re: taking 100 DCV measurements with constant duration using Keithley 2700

Post by Dale C » January 22nd, 2019, 11:42 am

Start off the program sequence of commands with a
*RST
Then when ready to take data send the
:INIT
command.
Then when you want the data send
:TRACE:DATA?
That should send back all 100 points of measurement stored in the buffer when addressed to talk.
Hope this helps.

Post Reply

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests